Maintenance Tips for Franklin Water Pumps: Keeping Your System Running Smoothly

Franklin water pumIps are distinguished as a top water pump brand. That is why they are chosen as the preferred pump choice for home, industry, agriculture, and waste water treatments and applications. While they stand up to wear and tear and other abuses over the years, you still need to make sure they’re running efficiently.

That’s why you need to ensure their continued operation and set up a regular maintenance plan. Because of their innovative and well-thought-out design, you won’t have to pay as much money to replace or maintain the equipment.

The pumps are built to last, provided you follow a regular maintenance routine. By staying with the Franklin brand and buying your pump from a Franklin brand retailer, you can obtain the parts you need so you’ll get the results you expect. Continue reading to learn the tips to keep your Franklin water pump running smoothly.

Following a Regular Maintenance Schedule and Plan

The key to keeping your pump operational is to keep it clean. Removing dirt and debris will keep your pump running efficiently. You can accomplish this task by using a garden hose and a brush to spray and scrub the outside of the pump.

Next, you’ll want to check the pump’s oil monthly. When the oil is low, add more oil (to the fill line on the dipstick) to keep the parts lubricated to prevent friction and wear and tear.

Finally, you’ll want to examine the pump every six months for wear and tear and corrosion. Call a service professional if you need any technical help. Doing so will keep your pump going for several decades of service.

Create a Maintenance Checklist

You’ll need to create a checklist to ensure your pump stays in working order. Below are the tasks you’ll need to perform to keep your pump working and up to speed.

Check Each Part

Basically, you’ll need to check for leaks, damage, and wear and tear. Replace or repair a part immediately to prevent a bigger maintenance issue from developing.

1. Inspect the Motor

Because the motor is the core of the pump, you’ll need to survey it first to check for rust or damage. Note if the motor is making any weird noises, such as high-pitched sounds or grinding. These sounds may indicate a problem with the pump motor’s components or bearings.

2. Check the  Impeller

The impeller is used to move water through the pump, so it’s important to check for damage or rust. These issues can directly impact the water pump’s ability to transport water or liquids, which can ultimately lead to the pump breaking down.

3. Check the Hoses, Seals, or Gaskets

A water pump’s hoses, seals, and gaskets are made to keep the water from leaking from the unit. So, make sure everything is safely connected. Any signs of cracks or leaks need immediate attention.

4. Examine the Pressure Switch

The pressure switch on the Franklin Electric water pump tracks the pressure inside the pump. Therefore, it’s vital to check it for visible damage or rust and make sure it is doing its job.

5. Take a Look at the Pump’s Pressure Tank

The pressure tank is designed to keep the water pressure at the same level while it runs through the lines. The tank is made to lessen any stress on the motor that may result from frequent starting and stopping. Check for leaks or corrosion and other abnormal signs of wear.

6. Closely Assess the Wiring

Your pump’s electrical components and wiring should be clear of visible damage, especially signs of wear. Scrutinize the connections for loosened terminals, burns, or frayed wiring. Don’t take chances. Make the needed repairs, as these signs may lead to a fire.

Read more: Everything you need to know about gutter cleaning tools for 2 & 3 story homes

7. Review the Inlet Screen 

Keep your pump debris-free by making sure the inlet screen is not blocked or clogged. Replace the screen when needed.

8. Double Check for Cleanliness

Ensure that nothing prevents the airflow around the pump so the pump does not overheat and keeps running efficiently.

Keep Your Pump’s Moving Parts Lubricated

You’ll also need to make sure all the parts that move in your system are lubricated so your pump can operate smoothing. Doing so will prevent unexpected noises and prevent breakdowns of the unit’s bearings and seals.

1. Bearings

You need to oil the bearings to prevent friction and noises and maintain the smooth operation of your water pump.

2. Shaft Seals

A water pump’s shaft seals keep water from seeping into the motor and protect the internal parts. When the seals are lubricated regularly, they remain watertight.

3. The Impeller

While you won’t lubricate the impeller like the other parts, it’s important to mention it. When the pump’s other parts are lubricated, they cool and keep the impeller operational. Lubrication maintains the pump’s hydraulic operation and reduces stress on the part.

4. Motorized Parts

Not all Franklin water pumping systems feature oil-lubricated engines. However, the pumps that do should have the oil replaced or topped off per the manufacturer’s guidelines. Make sure you use the suggested oil for your pumping system’s design.

Inspect the Electrical Connections and Parts.

Keep your electrical connections in top form by regularly inspecting the electrical connections. Regardless of their application, all types of water pumps depend on the same electrical connections and parts.

Check the following parts and see how they interconnect.

1. The Motor

Again, the core of the pumping system is the motor. Pumps either use a surface-mounted or submersible motor, depending on the pump’s purpose and design. The amount of fuel or electricity is based on its horsepower.

As the names suggest,  submersible motors are submersed or used underwater, while surface-mounted designs are used for above-ground applications.

2. Capacitor

The capacitor is used to store and release electricity to the pump. Check the capacitor for damage, as this part, when worn, can cause poor pump performance or trigger a pump breakdown.

Read more: Pros and cons of shower floors with pebbles

3. Pressure Switch

The pressure switch on a pump will set the system pressure based on a preset level. If the switch works properly, it maintains pumping performance – water flow and speed. Any problems with the connection will throw off the pressure, which will cause problems with pumping performance over time.

4. Circuit Breaker

The circuit breaker is built into the Franklin Electric pump and is designed to safeguard the pump’s electrical parts and connections. The circuit breaker detects short circuits or power surges to prevent fire, damage, or similar electrical dangers.

5. Control Box

The control box is the main hub for a Franklin electric water pump design. It holds the relay, capacitor, and the parts that protect the pump from electrical overload. Some control boxes may have an advanced control system that tracks and adjusts the pump’s operation as needed. This is done by checking the pump’s flow rate and pressure electronically.

6. Electrical Wiring

All the wiring for the pumps spans through the control box, motor, and the pump’s source of electricity. Careful checks of the wiring, again, is important for continued operations.

4. Maintain A Professional Maintenance Schedule

Besides checking your water pump yourself, you should maintain a professional maintenance schedule for your Franklin water pumping system. A service technician can easily spot problems before they become expensive repairs.

In Conclusion

Staying on top of your Franklin water pump’s performance will enable you to keep your pump running smoothing for decades. Use the above tips as a guide for enjoying more peace of mind.

Sharing Is Caring:


Leave a Comment